Flow Controls
Description
Symbol
Cross Section
Cavity Details
298
VH028
GAS Cartridge - 250 bar
Direct acting - Pressure Compensated
FRS0.G14 Valve Series
Technical Features
External surfaces are oxide burnished and corro-
sion-protected. All valve parts are made of high
strength steel. Spool is hardened and ground to gua-
rantee low wear and to extend service life. Optional:
upon request a calibrated steel wire can be installed
inside the spring chamber in order to prevent possi-
ble orice obstruction (recommended for rated flows
below 2 l/min). Suitable for heavy duty applications.
Extremely compact size. GAS cavity.
NOTE: This product is not intended to be used for
man lifting applications with the purpose to limit the
lowering speed.
A direct acting, screw-in insert type, 2-way pressure
compensated flow control valve. The flow rate of this
valve in the 1 to 2 flow path is largely independent
of the system pressure and is determined by the di-
mension of a calibrated orice. The valve cannot be
adjusted for variable flow output. Free flow in the 2
to 1 path is allowed and not pressure compensated.
Specications may change without notice.
299
Technical Data
Performance Details
Flow (l/min)
Estimated rated flow in
Reverse Function (2->1)
Flow Control Function
(1->2)
Flow (l/min)
Pressure (bar)
Pressure (bar)
Ordering Code
Maximum operating pressure 250 bar (2->1 max working pressure 210 bar)
Maximum flow 15 l/min (in flow control function)
External component treatment Oxide burnished
Oil Temperature Range -30° C to 110° C
Fluids Mineral - based or synthetics with lubricating properties
Viscosities 7,4 to 420 cSt
Filtration 20/18/15 ISO 4406 (maximum ltration admitted)
Orientation No restrictions
Installation torque 1-3 Nm
Technical specications for characterization See page 480
Oil testing condition ISO VG 46 cSt
Weight 0,013 kg
Note:The performance chart illustrates flow handling capacity in the pressure
compensated mode for a few signicant flow settings. p/Q curves are recor-
ded at TOil = 40°C and 46 cSt
020
150